16. How is the MSA1xxx storage system family positioned?
A. as a DAS solution with limited SAN capabilities
B. as a SAN solution with direct connect capabilities
C. as an entry level storage solution with controller based data replication capability
D. as a preconfigured solution with expansion capability to a mission critical enterprise solution
Answer: B
17. The Secure Path Agent communicates with which driver on a Windows 2000/2003 system?
A. RAIDISK.SYS
B. HSZDISK.SYS
C. HSXDISK.SYS
D. LP6NDS35.SYS
Answer: A
18. What information can be collected from an Array Diagnostic Utility (ADU) report? (Select three.)
A. problems that appear to be drive related
B. host bus adapter (HBA) errors
C. immediate hard read/write errors
D. Fibre Channel timeout errors
E. approaching prefailure and failure conditions
Answer: ACE
19. You are attaching MSA30 enclosures to an MSA1500 cs with all SCSI modules installed. On which bus and
port should they be attached?
A. bus 0 port A, bus 1 port A, bus 2 port A and bus 3 port A
B. bus 0 port A, bus 1 port B, bus 2 port A and bus 3 port B
C. bus 0 port B, bus 1 port A, bus 2 port B and bus 3 port A
D. bus 0 port B, bus 1 port B, bus 2 port B and bus 3 port B
Answer: A
20. Which Windows OS multipathing software is supported on an MSA1510i storage system?
A. QLogic failover driver
B. Secure Path for iSCSI
C. iSCSI protocol embedded function
D. Multipath Input/Output (MPIO)
Answer: D

11. What is the path status of a path that is currently servicing or is capable of servicing I/O to a storageset?
A. active
B. alternate
C. available
D. preferred
Answer: A
12. What is the default username and password to access the Storage Management Utility (SMU) for the first
time?
A. root; root
B. admin; admin
C. root; password
D. admin; -no password-
Answer: A

————–More information from:www.pass4side.com
13. Which utilities are used to monitor and manage the MSA1000-supported Brocade switches? (Select two.)
A. FTP
B. Web-Based Tools
C. HP Systems Insight Manager
D. ACU
E. Telnet
Answer: BE
14. According to best practices, what is the recommended status of the target before you modify ACLs? (Select
two.)
A. active
B. inactive
C. standby
D. pending
E. disconnected
Answer: BE
15. What happens if access control is disabled on an MSA1510i?
A. Only initiators without ACLs have access to any target.
B. Only initiators with an ACL have access to their targets.
C. All initiators with access to the controller can access the targets.
D. None of the initiators with access to the controller can access the targets.
Answer: C